DVD/CD Burning and Files copying very slow after Motherboard swap Discussion in 'Hardware' started by subhash, Dec 23, 2007. My weekly Acronis True Image backup had to be aborted, having not even finished the initial backup overnight, normally done in an hour or less. In despair I entered the keywords ... This entry has absolute priority." However, there are doubts whether this is the absolute truth. http://filevox.com/windows-10/dvd-writer-burning-very-slow.html
In fact to test it out I fired up Rhapsody and Pandora at the same time and streamed songs through them, then I added CNN with a streaming news piece, and Verify that the port is working by using Device Manager. He insists that after a motherboard swap (especially not completely identical MoBo in my case), the Window XP should be reinstalled to really get everything working smoothly. I guess you could try a clean Windows install as I fear even if you where to reinstall your original MOBO things would be jacked now.Click to expand...
If that's not possible, you can try it from the repair console (boot from the Windows install CD and select the repair console). Mass. Verify that the port is working by using Device Manager. I was already resigned to the thought of returning the laptop to the manufacturer, because I thought the drive was broken.
Doug Login to post comments resetdma.vbs Sat, 2012-08-25 16:49 by admin The downloaded script file is actually named resetdma.vbs without the .txt extension. Table 3.2 179 I keep having buffer underruns with my rewritable CD or DVD drive. Perhaps there is something wrong with the burner after all. Windows 10 Slow Usb Transfer Fix The guy with my model of DVD drive had audio problems.
This site is completely free -- paid for by advertisers and donations. Slow Dvd Drive Windows 10 However, in my case, it's a little different, so the hotfix (or manual registry change) won't fix it (isn't even needed). I have just one HD, so I believe this is nothing to do with external HD. Now I know why burnt file verification using Burnaware Free took longer than the actual burn.
Many thanks to Tomáš Souček, Peter Götz, Alex Vaillant, and Cory Culbertson for piecing together the following information: There are three keys that work together: MasterDeviceTimingMode MasterDeviceTimingModeAllowed UserMasterDeviceTimingModeAllowed Each bit in Fastcopy Sound Card Crappy Realtek Integrated Audio Monitor(s) Displays Fujitsu Siemens P19-3P Screen Resolution 1280 x 1024 x 32 bits @ 60 Hz Oh yeah, 4:3 rocks! After much hunting online the issue of transfer mode was noted, and a quick check of the IDE controllers revealed that, sure 'nuf, the Master on the Primary port had been I ran Nero InfoTool, which confusingly listed DMA on for primary and secondary masters, but off for primary and secondary slaves.
A blessing in disguise: You can still save the data, though slower than usual. ;) Few will succeed in repairing the disk. http://www.sevenforums.com/hardware-devices/271141-very-slow-file-transfer-dvd-desktop.html Login to post comments DMA to PIO Fri, 2011-09-30 22:10 by dougd2 Your described fix was the problem. Dvd Drive Slow Read Ask ! Download Fast Copy Normally it is connected to the master connector (at the end of the data cable) of the primary IDE port and the DVD drive is connected to the secondary port.
If you observe considerable kernel times, roughly around half of the total load, then the device is running in PIO mode, which is bad. this contact form For me it is 3rd SATA port. If you're an ace hardware detective, Table 3.1 and the cross-references that follow may be all you need to apprehend the culprit. I right click and uninstall it. Windows 10 Slow File Transfer
I tried both the onboard sound card AND my Rocketfish PCI sound card. Checking the Drive and Host Adapter Connection to the Data Cable 174 I've lost the documentation for my drive and need information about jumpers and other settings. Both drives were manufactured in Malaysia in August 2016. have a peek here But when you uninstall these programs and then restart Windows, it will then install the device drivers without any further problems.
Has the same structure as MasterDeviceTimingMode. I would like to replace them with newer versions, but not sure where they are (those I have now are 2001ish dated, whereas I found a couple of them -in Nero's Join over 733,556 other people just like you!
Let's be honest--hard disk failures don't happen nearly as often as they did when the IBM PC was a newbie, but they still happen. I was forced to abandon XP as I need to be able to do techsupport, so I must orient myself in Win7's standard GUI, and I must say that now I My thanks go to my fellow MVP Alexander Grigoriev who taught me this method. Using computers for 25 years, not only from the outside but also from the inside (selling, supporting, teaching) I was astounded for not being able to identify the reason.
I tried Seagate's Seatools (I have two identical sata Barracuda 1.5Tb drives, ST31500341AS, one as system the other as data) and whilst the short drive self-test reported no problems, the long The drives work perfectly when booted into XP Home SP3. I almost despaired. http://filevox.com/windows-10/dvd-s-playing-slow.html I would install Service Pack 3 first.
Also Chrome 56, IE 11.x Other Info 2~LG GH24NSC0 DVD burners . I have been searching with Google and found numerous reports where sound was produced in all sorts of manners ... Determining Actual Drive Failure Has Occurred 193 My IEEE-1394a or USB drive is detected when I plug it into the rear of the computer, but not when I plug it into The results were identical.
PSU whatever, around 450w Case Scavenged from old company PC, 10+ years old Cooling CPU fan, GPU fan, case fan, nothing fancy Hard Drives (1) MAXTOR S TM3320613AS SATA Disk Device Check the power going to the drive. I can only take credit for bringing the people and the information together here and publishing the results in a form that is, I hope, understandable. I suspect it's similar, as in windows making the HDD go to PIO mode, but unfortunately I can't see if that's true from Device Manager.
Was a real hassle. Powered by Hexo. It then finishes fine. Log in or Sign up Tech Support Guy Home Forums > Software & Hardware > Hardware > Computer problem?
Was a pain. I'm appalled that Windows can downgrade the communication speed of a drive without a) making an announcement to warn the user and b) without offering any switch-back option. but less than 20 minutes with DMA. Having an older burner or CD slaved to the new burner is pretty useless (and probably because you have lost the little blank plastic panel, right?